Закупки открыток по договоренности.
 itcdma
#523856
Heat treatment with high pressure gas quenching has been the preferred process in the heat treatment of high-speed steels and hot and cold working tool steels.
With the development of separate gas quenching chambers, it is often possible to replace oil quenching with high-pressure gas quenching using nitrogen or helium for heat treating case hardening steels or other low alloyed materials.
The success of this dry quenching technology is based on its environmental and commercial efficiency. Quenching gases such as nitrogen or helium are absolutely inert and without any ecological risk. They leave no residues on the workpieces or in the hardening furnaces. Therefore, investments in equipment such as washing machines or fire monitoring systems are redundant. This, in turn, reduces operating costs for hardening. When helium is used as a quenching gas, appropriate recycling systems for unlimited repeated use of the helium are available.
Control cabinet
Control system
There is a difference in the quenching pattern, using gas quenching vs. oil quenching, because of the laws of physics. The following diagram shows the different phases which occur during quenching in liquid media: film boiling, bubble boiling as well as the convection phase. The individual phases are characterized by very different heat transfer coefficients, which lead to big temperature gradients in the part, causing distortion of the part. Gases don’t show phase changes during quenching. Heat transfer all over the part is more homogeneous and the risk of distortion is reduced. Excellent process control for the entire quenching process is guaranteed by the control of gas pressure and gas velocity. With these parameters, the quenching speed can be adjusted to the parts requirements.
ModelDimensions of service area (mm)Charge batch
(kg)Heating materialHeating power
(kw)Max.temperature
(℃)Temperature
Uniformity
(±℃)Final vacuum
(Pa)Pressure
Rise rate
(Pa/h)Air-cooling
Pressure
(bar)
VTG-335300×300×450100Graphite /
molybdenum80132056×10-30.56/12
VTG-446400×400×600300Graphite /
molybdenum100132054×10-10.56/12
VTG-557500×500×700500Graphite /
molybdenum120132056×10-30.56/12
VTG-669600×600×900500Graphite /
molybdenum150132054×10-10.56/12
VTG-8812800×800×12001000Graphite /
molybdenum240132056×10-30.56/12
VTG-9912900×900×20001500Graphite /
molybdenum350132056×10-30.56/12Vacuum Quenching Furnace
website:http://www.v2vacuumfurnace.com/vacuum-h ... g-furnace/